Vehicle inspection check list

All street trucks please follow by the rules set out for the street trucks.

Vehicle

1. All vehicles must have a rear hook-up point and an eight-foot choker.
2. All competition vehicles in B through F class must have a five-point harness. Mounting point must be between two and four inches below shoulder. Mounting hardware must be 5/16", grade five bolts, 1 1/2" washers for body mounts and lock washer.
3. All competition vehicles in B through F class must have a six point roll cage. All cages must have a minimum of 1 5/8" .120 tubing for cages/bars. Cages/Bars made from exhaust tubing or weaker material are not acceptable and will not pass. Cages/Bars must fully protect the driver. Cages/Bars may not have collapsing bends and all connecting points must be properly welded. Questionable Cages/Bars will not pass. There must be adequate padding on bars. Bars must be a reasonable distance above the driver's head and helmets must not surpass the Cage/Bar heights. Cages must have crossbar going above the driver, to the floor and sidebars. Director to inspect welds and metal quality may remove Padding.
4. A class vehicles must have a securely fastened lap and shoulder belt.
5. All seats must be securely mounted and reinforced with additional bracing at shoulder level for back support. Factory floors must have seat mounted to floor. If floors other than factory, the seat must be securely mounted to the frame. Poorly mounted seats will not pass. Factory floors must be stable. Vehicles with floors other than factory must have floor securely mounted to frame. Floors can be made of aluminum or sheet metal but not materials like expanded metal, fiberglass, or wood. Vehicles with factory floors must have Cage/Bars securely mounted to floor with 6"X6", 3/16" steel mounting or better. If floors are other than factory, Cages/Bars must be securely mounted to vehicle frame. Unstable floors will not pass.
6. Full helmets with facial protection and chin straps mandatory for all drivers. Eye protection mandatory in vehicles without windshield and in alcohol vehicles.
7. Competition Vehicles in B through D classes may modify body but it must be of recognizable production style.
8. All vehicles must have a metal firewall fully protecting driver. Intake deflectors mandatory.
9. All vehicles must have a functional fire extinguisher mounted in easy driver access. ( B thru F classes)
10. Vehicles running alcohol must have a functional, on-board system (3 nozzle) capable of extinguishing alcohol fires.
11. Vehicles running alcohol must have a functional cab extinguisher mounted in easy driver access.
12. Drivers of alcohol vehicles must wear an alcohol approved fire suit including shoes, gloves and facial socks.
13. Minimum of one-ply fire jackets mandatory for all competition vehicles in B through F class. Neck supports mandatory for all drivers of competition vehicles in B through F class.
14. Vehicles with blower induction systems must have secured blower straps and aluminum blower studs.
15. Race vehicles must have one of the following: Transmission Blanket, Scatter Shield, or Transmission Shield. Shields must cover top & sides
16. All Competition vehicles in B through F class must have a clearly labeled, functional Kill Switch located at the rear, center of the vehicle. It must shut down all vehicle operation.
17. All toggle switches must be clearly labeled.
18. Competition vehicles in B through F class must have a minimum of one hoop per driveshaft and universal guards on all differentials.
19. All batteries must be securely mounted and tied down. Interior batteries must be in a securely mounted, sealed battery box.
20. Interior fuel gauges and lines, electrical wires and nitrous lines must be driver protected. Interior fuel tanks, cells and nitrous bottles must be securely mounted and driver protected.
21. Vehicles involved in fires, rollovers, etc., must be re-inspected before being permitted to continue racing.
22. No loose articles in vehicle's box or cab.
23. All body panels and doors must be secured.
24. Two wheel drive vehicles must make solo passes. 
25. Passengers are not permitted in race vehicles.
26. Names, symbols and advertising may be displayed on vehicles provided they are in good taste.
27. Any driver found to have alcohol and/or drugs in his/her race vehicle while in restricted track areas will immediately be disqualified.

                                                                Return Home